[Abu noor]

Thanks Mr.Naser

[Abu noor]

Thanks Mr.Nasser
For fast response

[Abu noor]

Thanks Mr.Nasir
Once flushing is completed through system we can stop Fractionator pump which is used for internal circulation?
Only we will keep long loop circulation if not why?

[Abu noor]

As we discussed earlier here attached sketch for heaters firing control.

[Abu noor]

Dear Mr.Nasser
See the attachments for product stripper pump

[Abu noor]

Dear Mr. Nasir
Thanks a lot for your answer.
We have three pumps one turbine driven and others motor dirven.There is no
spillback is provided for this pump.Below is the product stripper level control with 8 passes.

[Abu noor]

If SOR 373 and EOR 404 for reactor inlet and SOR 398 and EOR 409. How much WABT will be initially and when we can increase it based in what?

[Abu noor]

That’s great answer
Thanks a lot

[Abu noor]

It’s mentioned in the SOP. The self-regulated main fuel gas valve 160-PCV-0165 is correctly set to the required pressure downstream in the line (0.1kg/cm2g) and 0.1 Kg/cm2g is too low that the Leak test can not be succeeded.

[Author]

Posts